Diamond Clarity - Flawless, VVS2, Or SI1? A Rating Guide

What does Clarity mean?

When you are shopping for a diamond engagement ring, a diamond pendant, diamond earrings, or any piece of diamond jewelry; one important factor is the "Clarity" of the diamonds that you choose. Clarity is one of the 4Cs that are used in setting the price of diamonds. The definition of clarity is "the quality or state of being clear". Having a diamond without anything inside of it is extremely rare, especially in larger diamonds. Because of this rarity factor, as a diamond becomes "cleaner" it also becomes more expensive.

Of all the diamonds that are mined every year, only about 20% are "clean enough" to be used in diamond jewelry with the other 80% of the diamonds being used for industrial purposes. So if you have a diamond with the highest possible clarity grade then it really is one in a million, making it even that much more special!

What makes up the Clarity of a diamond?

The two factors that will determine a diamond's clarity are the things that are on the outside, these are called blemishes, and the stuff on the inside of the diamond, these are called inclusions. A diamond will almost always have some other things that were caught up inside of it as it was growing below the surface of the earth. Because diamonds are on average 3.3 billions years old, they have grown very slowly. As they grew, the diamond encountered other materials in their neighborhood where they were formed. The process of having something "included" inside of a diamond crystal took hundreds, thousands, or millions of years to happen. So when you see inclusions inside of a diamond it is like looking back in time over millions or even billions of years. Diamonds most commonly have other diamonds captured inside of them... that's pretty cool, you get more than one diamond with your purchase!

Common inclusions are as follows-

* Clouds

* Feathers

* Included crystals or minerals

* Cavities

* Cleavage

* Bearding

* Internal graining

* Needles

* Twinning wisps

Blemishes are the things on the outside of the diamond. Most of these are a result of the diamond cutting process and could be removed by a diamond cutter. These are not such serious items and usually don't play a major part in determining the clarity grade of a diamond.

Common blemishes are as follows-

* Polish lines

* External Graining

* Naturals

* Knots

* Scratches

* Nicks

* Pits

* Chips

* Fracture

* Extra facets

* Cavity

The clarity grades are as follows-

FL (Flawless)- No inclusions or blemishes of any sort under 10x magnification when observed by an experienced grader.

IF (Internally Flawless)- Has no inclusions when examined by an experienced grader using 10x magnification, but will still have some minor blemishes.

VVS1 and VVS2 (Very, Very Slightly Included)- Contains minute inclusions that are difficult even for experienced graders to see under 10x magnification.

VS1 and VS2 (Very Slightly Included)- Contains minute inclusions such as small crystals, clouds or feathers, when observed with effort under 10x magnification.

SI1 and SI2 (Slightly Included)- Contains inclusions (clouds, included crystals, knots, cavities, and feathers) that are noticeable to an experienced grader under 10x magnification.

I1, I2, I3 (Included)- Contains inclusions (possibly large feathers or large included crystals) that are obvious under 10x magnification and may affect transparency and brilliance.

It is the combination of the inclusions and the blemishes along with their size, their number, their position, their nature, and their color that will determine a diamond's clarity. There are a lot of variables involved in making a diamond a certain clarity... it is because diamonds are kind of like snowflakes, where each one is different.

A bit of history about the Clarity system.

Currently we have a diamond clarity grading system that everyone understands and has worked well for many years... it wasn't always this way. Years ago, if someone was describing the clarity of a diamond and they said that it was a "clean", a "piqué", or a "loupe clean" diamond, would you know what they meant?

Richard T. Liddicoat of the Gemological Institute of America introduced the current system in 1953 and it was immediately adopted as the universal system to classify the clarity of a diamond. The eleven different clarity grades communicate the clarity quality of a diamond regardless of the geographic location or the language of the consumer.

Along with the definition of these eleven clarity grades, GIA also states that the clarity grading be done by a trained person using a controlled "darkfield" lighting environment, and a 10X magnification corrected for spherical and chromatic aberration. Wow! that sounds pretty technical! however it's relatively easy to understand this system.

How will you be able to know the Clarity of a diamond?

You, a person who is not fully trained in this system, probably might not be able to accurately determine the clarity grade of a diamond. A Gemologist who has been trained as to all the variables involved will be able to determine the clarity grade and they will also be able to show you why a diamond is a certain clarity.

The best way to be assured of the clarity of a diamond will be to have a diamond grading report issued by a credible gemological laboratory. The best reports will be from GIA, AGSL, or GCAL. These nationally known and well respected labs do use a number of graders who must agree on all of the qualities of the diamond before a report is issued.

What is the best Diamond Clarity for me?

The price of diamonds will change, go up or go down, as the clarity moves higher or lower. For diamonds in the most common color, cut, and weight range, as a general rule, look for about a 15 to 20% change in pricing for each change in clarity. A diamond with a clarity grade of FL (Flawless) is no more beautiful than a diamond with a clarity grade of SI1 (Slightly Included 1) but a FL clarity can be more than twice the price of a SI1 diamond.

From the FL to the SI1 clarity grades, any inclusions and/or blemishes are only visible when you look at them using 10X magnification. I don't know of anyone who walks around with a 10X magnifier in their pocket in order to look at people's diamonds... sorry, let me correct that, I don't know of anyone except for jewelers and Gemologists (including myself) that walk around with a 10X magnifier in their pocket.

You will need to see for yourself what these different clarity grades actually look like. I know many people who have looked at the clarity grading chart and see that the VVS2 or VS1 are "in the middle" of the chart so they think it is what they would like to consider when buying a diamond.

There are only a few diamonds that can fit into the nearly impossible FL and IF grades and just a few more diamonds that are able to fit into the extremely tight VVS1 and VVS2 grades... a single tiny, microscopic, pinpoint inclusion will easily move a diamond out of these grades. As you move down into the VS, SI, and I grades it widens out and many move diamonds will fit into these grades. SI1 is more "in the middle" than either VVS2 or VS1.

Find a good Gemologist to teach you or do some research online about diamond clarity grades, it's really not too complicated. When you buy larger diamonds, make sure they come along with a diamond grading report that you trust.

Buy Bud Boland

Diamond Choice

The precision of the cut determines the maximum amount of light that will be reflected through the diamond. When a diamond is cut to good proportions light is reflected from one facet to another and then dispersed through the crown or the top of the stone. Put another way, when light shines on a diamond, the light bounces through the diamond and reflects back out the top. The diamond will sparkle, is lively and dancing with spectral color or some use the term "fire". The best cut or Ideal Cut Diamond is not cheap but is worth every extra dollar.

The Cut of the diamond can be also graded into groups: Ideal, Premium, Very Good, Good, Fair and Poor.

An Ideal Cut or Excellent cut diamond will give you the maximum brilliance or sparkle. Diamond jewelry with Ideal round cut Diamonds are some of the finest money can buy and wonderful to own.

A Premium cut, also known as Fine, is a diamond that is graded just below the ideal cut. A premium cut diamond is still one of the finest and will give you maximum brilliance or sparkle. A Diamond Pendant with a premium cut round diamond will be beautiful, will sparkle and be a joy to own.

A Very Good cut is a grade just outside the tolerance of an ideal/premium cut and will reflect most of the light that goes into the diamond. In some cases a decision was made to create a larger diamond rather than to cut into the diamond to create the proper proportions that would give an ideal cut. The price of this diamond will be slightly lower than a premium or ideal cut diamond.

When a diamond is graded as Good much of the light will be reflected to give a sparkle. Diamonds cut with a good proportion have been cut to maximize the size of the diamond and not the brilliance. Diamond Jewelry with good diamonds will be offered with great cost savings. If you are looking for a larger diamond and want to stay within a budget this would be a good consideration that will give you size and also quality.

Fair to Poor cut diamonds are below average and will reflect only a small amount of light. These diamonds have been cut to maximize the size with little consideration to quality.

Diamonds are cut in different shapes. Some of the most popular shapes are brilliant, marquise, pear, emerald, oval, heart, square. The shape of the diamond you choice is just that your choice. The only other thing to consider is a round cut diamond will give you the more sparkle as compared to a pear shape.

COLOR grading scale varies from totally colorless which are rare beautiful diamonds to a light fancy. Our online jewelry store, Golddiamondspro offers you some Diamond Rings with colorless graded diamond with the majority of our Diamond Jewelry offered with diamonds graded G-H Color.

Grading

D, E, F - Colorless, exceptional white, highest color grade and a rare diamond

G, H, I, J - Near colorless and exceptional value

K, L, M, N - Slightly tinted giving you good value

M, N - Tinted

O, P,Q - Very light yellow

R, S,T - Light yellow

U, V, W - Yellow

X, Y, Z - Light fancy

CLARITY is graded with the use of a magnification corrected loupe 10x magnification by a trained professional. With this magnification they are able to see characteristics or inclusions that make every diamond quite unique. These inclusions are nature's fingerprints and neither detracts from its beauty nor jeopardizes its durability. It is the number, nature, position, size and color of these inclusions and how easily they are to see that will determine the grade of a diamond. Clarity is graded from flawless to heavily included inclusions.

Pure flawless diamond has no internal faults or inclusions when examined by a professional using 10x magnification loupe.

VvS1 - Very, very Small Inclusions with internal faults that is difficult for a professional to observe but with a minor fault cannot be designated as flawless.

VvS2 - Very, very Small Inclusions with internal faults but minor and cannot be designated as flawless.

VS1, VS2 - Very Small Inclusions in a diamond that is difficult for a professional to find using a magnification loupe. They may fine a few somewhat larger internal characteristics or several very small ones.

SI1, SI2 - Professional Grade using 10 x magnification loupe may, without difficulty, find internal characteristics or inclusions which may only have insignificant single fault.

I1, I2, I3 - Professional Grade I is used for diamonds which a professional observer with a naked eye can see internal flaws and/or have such major faults which reduces the value of the diamond.

CARAT-WEIGHT or size of the diamond is divided into 100 "points" which is One Carat. A diamond of 25 points is described as quarter of a carat or 0.25 carat, 50 points would be .50 carat or ½ carat, and ¾ carat in weight is 0.75 carat. There are five carats in a gram.

Which Diamond Should you buy? Size is one of the most obvious factors in determining the value of a diamond but now you know that two diamonds of equal size can have very different values depending on their quality. The cut, color, and clarity are important factors to consider when looking at the value of diamond jewelry. To purchase the best diamond ring, bracelet, earrings or necklace look for the least amount of color and an ideal cut. This will be the most expensive but beautiful and definitely the finest you can buy. If your funds are limited then buy the finest cut you can. Buy now at GoldDiamondsPro choicing the factors that are the most important to you.

By Elsie Coates

What You Should Know When Buying a Diamond Ring

Diamond information for couples interested in buying a diamond engagement ring. At a point in nearly every man's life, there comes a time when his heart knows it's time to buy a diamond engagement ring for the woman he loves. Only then will you feel comfortable buying a diamond engagement ring. There are many things to consider when learning how to buy a diamond, you should never rush into buying a diamond without first doing a little research as to how the diamonds are priced. Buying a diamond is no different, except most of know us very little about diamonds. Buying a diamond ring is often an emotional - not to mention expensive - experience.

Diamond Ring:

Buying a diamond ring can be a huge investment and you want to get one with the perfect diamond in it, so you may be intimidated if you are a first time buyer. Buying a diamond means investing in a piece for forever. Every individual buying a diamond seeks out the best they can afford. When buying a diamond, consider your budget and where the stone will be worn to help determine the ideal carat size. The Four C's of Buying a Diamond, to determine the best price for your ring, you need to be familiar with the four C's. The four C's of cut, color, clarity, and carat are explained.

Diamond Color

Most diamonds have a slight hint of yellow and the diamond color scale is based on the amount of yellow present in a diamond. It's the absence of color that adds value to the diamond. Diamond color is graded according to the GIA Grading Scale. Grades are based on the amount of yellow that is visible when viewed face down through the pavilion using the GIA Diamond Lite. The color scale ranges from D (colorless) to Z (yellow tinge).

Diamond Cut

To achieve the maximum reflection of light that causes a diamond to sparkle requires a diamond to have an Ideal/Excellent cut grade. Ideal cut diamonds are graded as such because they fall within the ideal cut grade parameters specified by the diamond grading labs. The better cut grades are likely to display more fire and brilliance and since their appearance is more desirable, they are priced accordingly. The GIA and EGL have only extended ideal/excellent cut grade parameters to round brilliant stones at this time. Determining a diamond's cut grade, however, goes beyond simple measurements of width and depth. Diamond Cut is perhaps the most important of the four C's.

Diamond Clarity

A diamond's clarity is determined by the number, nature, position, size and color of internal characteristics called "inclusions" and surface features called "blemishes". These show themselves as the various characteristics which make up the clarity of a diamond, included crystals, feathers, clouds etc. These characteristics are sometimes not visible to the naked eye and they are what make each diamond unique. This clarity grade becomes more important as the diamond size increases. The clarity scale was developed by the Gemological Institute of America GIA to quantify these imperfections.

Diamond Carat

It is a common misconception that carats refer to the size of a diamond. In reality, a carat is the standard unit of weight by which diamonds are measured. Since a carat is a measure of weight, not size, one diamond of the same carat weight may look bigger than another depending on the cut. A premium cut diamond may actually appear bigger than many diamonds of a higher carat weight.

Diamond Shape

Stones come in different shapes - round, oval, marquise, pear, emerald, heart, princess, and radiant.

Round

A round brilliant is a great choice if you want the most sparkle and the most enduring classic shape round-brilliant diamonds are the only shape to have this ideal proportion defined. Brilliant cut diamonds have facets that are shaped like triangles and kites. Today's round brilliant diamond has a total of fifty-eight facets, but you'll see varying facet numbers in vintage brilliant cut diamonds. Even though Round Brilliant cut diamonds are the most expensive in the market, they make up the overwhelming majority of diamonds found in engagement rings, and are popular as stud earrings and pendants.

Oval

The elongated shape of Oval diamonds gives a very flattering effect to your finger when worn in a ring, and is found in some of the most beautiful diamond engagement rings. Unlike round cut diamonds, oval cut diamonds have an elongated shape, which makes the diamond appear larger in carat weight. Oval cut diamonds are essentially elongated round cut diamonds. Many women with smaller hands or shorter fingers prefer the look of oval cut diamonds and pear shaped diamonds because they truly slenderize and elongate the fingers on the hand.

Marquise

While marquise diamonds are not as popular as round cut diamonds or princess cut diamonds, they are still quite sophisticated and elegant. A marquise cut diamond has a uniquely beautiful shape that is favoured by many women, but a small percentage of brilliance will be sacrificed for the beauty of this uniquely diamond shape. Compared to the round cuts, the marquise diamonds are not as popular these days. In addition, the shape of the marquise diamond almost makes the stone appear larger than it is. The Marquise shape was created for Louis the XIV and is has become a timeless classic.

Pear

The pear shape is a stunningly feminine diamond shape with a rounded end on one side and a tapering point at the other. Due to their elongated shape, pear cut diamonds are known for their slenderizing effect. .The Pear cut allows a range of cutting styles, so that the teardrop shape can be wider, slimmer, or cut to Ideal proportions, based on your choice and preferences. Pear shaped diamonds have a rounded end and a single point. While pear shaped diamonds are not as traditional as round cut diamonds, or as trendy as princess cut diamonds, they are still coveted by many people.

Emerald

The emerald-cut diamond is among the most classic of diamond shapes that is distinguished by beveled corners and step facets, emerald cut diamonds are more transparent than other shapes, resulting in the need for higher standards of clarity. The emerald cut can be one of the least expensive to cut because its shape is most like the natural shape of the rough diamond crystal. Because of the angle, size and shape of the facets, the emerald cut shows less brilliance and fire dispersion than the other brilliant cut diamonds. However, the emerald cut stone reveals a classic beauty and elegance not seen in other cuts. The trim lines of Emerald cut diamonds lend an elegant, sophisticated air to both the simplest of ring designs.

Heart

The heart-shaped diamond is the most romantic of diamond shapes and a symbol of love and affection, the heart cut diamond is an excellent choice for an anniversary or engagement ring. It is a tender gesture to make to someone special. A quality heart-shaped diamond is lovely and distinctive, with an even shape and well-defined outline. They are the ultimate symbol of romance, and more and more people are choosing heart cut diamonds for engagement and anniversary rings. Heart Shaped Diamonds are rarer and more expensive as it takes a large piece of diamond rough to shape cut and polish to something that is the ultimate symbol of love "the heart"

Princess

A modern innovation, the princess shape dazzles and sparkles with its star burst facet pattern, while still leaving the crown of the diamond flat and open. The princess cut is stunning set as a solitaire it is a modern classic of clean, square lines and beautiful sparkle. Its sharp corners are usually contained in a four-pronged or bezel set in wedding rings. You will also find Princess cut diamonds are often channeled into the wedding band itself. Princess Cut Diamonds are for those people who love the sparkle and brilliance associated with round cut diamonds, but prefer the shape of a square. While the round brilliant solitaire seems to be the most popular shape right now for engagement rings, many people are deviating from this trend and going with princess cut diamonds.

Radiant

The radiant cut was first patented in the late 1970's by Henry Grossbard, with its angular shape and brilliant cut facets it makes a scintillating alternative to other cuts such as the Emerald cut. The radiant shaped diamond can be considered a modified brilliant diamond that is closely related to the princess cut diamond because of its square shape. High quality Radiant cut diamonds combine the fire and sparkle of Emerald and Round cuts.

Now you know the different shapes of diamonds that you can purchase and which shape will accentuate individual fingers or provide brilliant sparkle we can now move on to the ring.

There are many different metals used for rings today which can be grouped into two, precious and non -precious, those in the precious group including silver, gold, and platinum, while those in the non-precious group can include brass, copper ad nickel. Most rings today are made of gold or platinum so we will focus our discussion on these two precious metals.

Gold

Gold comes in various colors that can reflect the carat value of the carat of yellow gold with 10k, 14k and 18k being the most popular. Did you know that you can get Rose Gold, white gold and yellow gold and that white gold is more a silver color than white? Until recently white gold was yellow gold with as much of the yellow gold removed as possible, however it was still not a true white color. To give you that white (silver) brilliance the rings are plated with Rhodium or palladium.

Platinum

Platinum became very popular for its natural white (silver) color and durability. Customers that buy white gold rings that have rhodium plating will have to have the ring re-plated every few years if it's worn regularly, as the rhodium wears off. With platinum the color stays the same no mater how often you wear it. Platinum is about twice the price of 14K Gold and can push the price of the setting and diamond out of the range of some customers.

Ring Mounts

There are thousands of different settings available for you to choose from; they come in all shapes and sizes, from solitaires to multi stone rings. Your choice is a personal one; however you should consider when you are going to be wearing your ring. If you plan to wear it daily then pick something with a low profile that protects the diamond and setting from getting damaged if you accidentally catch it against something. This could lead to the diamond coming loose and having to be reset, to forcing the diamond out of the mounting and breaking it.

On the other hand, if you are only going to wear the ring for special occasions then purchase a mount that holds the diamond high so that it's well displayed and allow the light to enter unobstructed from the top and show the scintillating fire and brilliance.

Remember that if you are purchasing a high quality diamond for your ring that having other diamonds around it will detract from your central diamond. If on the other hand you are purchasing a smaller center diamond adding smaller ones around the outside will make the center one look larger.

Engagement sets are also very popular, with couples purchasing the engagement ring and then going back and purchasing the wedding band from the set, for that special day.

By Derek Parnell

Interested in Buying Diamond Jewelry? Start With the Basics!

Diamond buying has gotten easier! Or has it?

Many years ago buying some diamond jewelry was kind of simple. You know... if you wanted to buy some diamond earrings, a diamond bracelet, or a diamond engagement ring, you would go down to your favorite local diamond jewelry store, you would sit down, and then you would choose your favorite piece of diamond jewelry from your trusted family jewelry. Well some of that scenario has changed a bit in the past 30 years and now it is up to you, the diamond jewelry shopper, to play a more active part in this process and so you will need to do your homework before you make your purchase.

The 4 basic elements that make up the pricing of diamonds are pretty straightforward. But like most things, once you get past the basics, the information overload starts to become more than many consumers need to know. The first 3 components of a diamond's pricing; Clarity, Color, and Carat Weight are pretty easy to understand. The heavier the diamond (a greater Carat weight), the more it will cost. The less "stuff" inside of the diamond (a higher Clarity), the more it will cost. The more it looks like "ice" (a higher Color, more colorless), the more it will cost. There are charts you can use for reference so it is kind of easy to comprehend.

The one "C" that gives you the most trouble.

The "Cut" of a diamond is the biggest factor in how beautiful a diamond will be... meaning that if a diamond is cut to exacting angles and proportions, the diamond's potential beauty will be realized. It is this one factor that can account for nearly 50% of a diamond's value! When it comes to the Cut of a diamond, there are many people who can become confused as to what all those numbers and terms mean. Over the years, diamond cutters have been improving their methods and the quality of their finished product. There are a couple of things that have been driving these improvements. The first would be the greater number of Gemologists that are working in the jewelry business and they can quickly and accurately tell the difference between well cut and poorly cut diamonds.

The other big change has been the wide spread use of diamond grading reports, which have become a "must have" part of the diamond transaction. Even with these changes in the diamond buying process, a diamond's Cut can still be a minefield of misinformation and confusion. Just because a diamond has a grading report it does not guarantee that the diamond will be beautiful. When considering a diamond that comes with a grading report, it is best if you only accept diamond grading reports that come from GIA, AGSL, or GCAL. These diamond grading reports do have a Cut grade that can be trusted and that can be used to compare with other diamonds. The topic of diamond grading reports can be pretty involved and there are times that you can depart from this general rule.

What's a consumer to do?

Information will be an important part of any diamond buying process but there is also another element that must not be overlooked. That element? Trust. Just imagine the process everyone should go through when considering buying some diamond jewelry from a local jewelry store. You would want to consider a local jeweler who others have recommended, who has experience, who is a Gemologist, who is located in proper jewelry store, who will spend time with you, and who will freely give you the information that you will need to make an informed decision.

This same type of criteria should also apply to anything you encounter in the online world of diamonds. I am amazed by the amount of incorrect information about diamonds that exists on the Internet. The people dispensing this misinformation are saying that they can save you 70% or $2,987.43 on your next diamond purchase and at the same time they are trying to sell you their new e-book "The Diamond Secrets that jewelers don't want you to know!" for $97.

Would you buy a diamond from somebody who has set up a tent at the corner next to the gas station? This is the same tent that just last week had big banners stating "Information On How To Save $$ on Cell Phones" but now those banners say "Information On How To Save $$ on Diamonds!". If you enter the tent, they don't bother telling you any reason why you should believe anything that they have to say. There are probably some pretty pictures and some bright lights in there. If you can find their "About Us" button and you click on it... up pops "We are committed to bringing you the best diamond buying information". OK, that's nice... but what does it mean? Who is "we"?, what experience does "we" have in the jewelry business?, does "we" have any experience in actually buying and selling diamonds, why should you believe a single word that "we" has to say?, and do you have any reason to trust "we"?

Don't stray too far off the path!

In the search for the right diamond or piece of diamond jewelry it is always best not to be distracted by the siren's song of low prices. You generally get what you pay for. Your local retail diamond jewelry store might have higher diamond prices (maybe they might be able to match online diamond prices!) but they also have diamonds that you can see before you buy, they might have a good trade up program, they might offer a free appraisal, they might offer free checkups / cleanings, they might offer free ring sizings, they might offer lifetime damage or loss guarantees, and a diamond purchased from them could have the added cachet of being a piece of diamond jewelry from Tiffany verses a piece of diamond jewelry from super-ultra-dirt-cheap-diamonds.com.

The online diamond retailers do offer an attractive alternative to traditional diamond retail jewelry stores. Online diamond retailers do offer quality diamonds at good prices along with being able to set the diamond into a basic mounting but it will require more work on your part along with making a purchase of a product sight unseen. Because this type of purchase will be a blind transaction... trust in your basic diamond knowledge along with trust in the company you are dealing with will be essential.

Start and stick with the basics! The 4Cs and trust.

By Bud Boland

Diamonds - Interesting Facts

Diamonds are the symbol that we use to show are undying love for someone. They are the traditional icon of romance and love. Most people may be surprised to learn that the majority of diamonds that are mined today are used for industrial purposes and not for jewelry.

Historians believe that diamonds may have first been used for industrial purposes not for their brilliant sparkle and allure. Peter Lu a Harvard physicist and his colleagues discovered that in the late Stone Age the Chinese used diamonds to polish ceremonial burial axes. Today about 80% of mined diamonds are used for cutting, drilling, grinding and polishing.

Most people might be surprised to know that diamonds are not the hardest substance on Earth. Diamonds are the hardest natural mineral substance, but they are not the hardest substance known to man. A substance called Aggregated Diamond Nonorods is about 11 % harder than a diamond.

The first diamonds were discovered by Indians over 3,000 years ago. Diamonds didn't get associated with love and romance until the 1940's when the De Beers Company began to advertise diamonds as the perfect item for a wedding or engagement rings. They did an all out media campaign and soon people were buying diamond engagement rings all over the world.

It is believed that most diamonds are over three billion years old and most are formed more than 100 miles below the surface of the earth. Before the sixth century, India was the only known source of diamonds and was the predominant source for over 2,000 years.

The Romans believed that diamonds had the power to ward off evil and wore them as talismans. It is believed that they inherited this belief from Indian mythology. In France in the thirteenth century it was decreed that only the king could wear diamonds.

The Gemological Institute of America was founded in the 1950's. It was the first internationally accepted diamond grading system. This system applied uniform criteria to grading the quality of polished diamonds. The GIA Gem Trade Laboratory Diamond Grading Report is the benchmark for the international gem and jewelry industry.

The Cullinan diamond was the largest rough diamond ever found and was 3,106 carats. It was discover in the Premier mine of South Africa in 1905.It was cut into nine major stones. The largest of the stones is the Star of Africa and is 550.20 carats. It is housed in the Tower of London and mounted in the British Royal Scepter. The most recent diamond discoveries have been in the Northwest Territories of Canada and in Colorado. Explorers found diamond pipes in both locations in 1990.

It wasn't until the late 13th century that diamonds were used in European jewelry. Diamonds were initially used for engraving other gems including sapphire cameos. They were also used for drilling holes in hard stone beads.

Diamonds have been around forever and are cherished by all. Diamonds have an exciting and lively history. These are just a few of the fascinating facts associated with diamonds.

By Lawrence Reaves

Tips For Buying Diamond Eternity Rings

Most women love receiving jewelry for a gift on just about any occasion. There are times, however, when only diamond eternity rings will do. These diamond rings are typically given as anniversary gifts or other occasions.

What makes diamond eternity rings different is the fact that the diamonds go all the way around the band. These bands of gold and diamonds are perfect for "stacking" which means a lady can sport two or more of these on one hand.

When purchasing diamond eternity rings be sure to do everything that you would normally do while diamond shopping. The Cs, which are cut, color, clarity and carat weight will tell you if you are purchasing diamonds that are worth the money that you are spending. The fact that you are buying a ring with smaller stones all the way around the band should not deter you from looking into the quality of the stones.

The cut of a diamond is all about the shape. Round diamonds will offer more sparkle and shine to the diamonds. The choice of cuts whether it be round, princess cut or any of the other shapes is normally contingent upon personal preference.

The color refers to how much yellow tint your diamond eternity rings will have. The levels are categorized by letters with D being colorless. The tint will be more the higher up the alphabet you go.

Clarity is how many imperfections one can see with the naked eye. There various levels to this as well and if you are choosing diamond eternity rings based on clarity you will want to look at a scale at your jeweler to see what your options are.

Carat weight is exactly what it says. This is how much the diamond weighs. Most diamond eternity rings will have smaller diamonds that are either channel set or prong set around the entire ring. The combined total weight of all the diamonds will determine how much carat weight you have.

Diamond eternity rings are normally given to women on their wedding anniversaries but in today's world, there are more and more bride who love the look and feel of these bands and are opting to use them for
wedding bands.

By Rich Keys